Description
The 2022+ Genesis G70 Quad Exhaust Tail Pipe Tips give your 3.3T or 2.5T a more aggressive, performance inspired rear look without changing the factory exhaust. These tips replace the OEM oval covers with a quad outlet design and mount on the existing points, so you get a bold style upgrade while keeping an OEM friendly install.
Genesis G70 quad exhaust tip features
- Aggressive quad tip design that fills the rear openings with a sportier look.
- 3D printed from high strength carbon fiber nylon for a rigid, durable part.
- Direct replacement that uses the existing factory mounting points.
- Quick install that only requires removing a few screws and swapping the covers.
- Designed specifically for the 2022+ Genesis G70 3.3T and 2.5T with OEM exhaust.
Fitment
- Vehicle: Genesis G70
- Years: 2022 and newer
- Engines: 3.3T and 2.5T models with the OEM rear bumper and factory exhaust layout as shown in the photos.
What is included
- One pair of quad exhaust tail pipe tips for the left and right side.
- Integrated mounting points that line up with the OEM screw locations.
- Handcrafted metal heatshield section for additional protection behind the tips.
Install information
- Estimated install time: around 15 to 30 minutes.
- Difficulty: Easy. Most owners can install in a driveway with basic tools.
- You remove the four screws that hold each factory oval cover, position the quad tips and reinstall the screws into the existing mounting points.
- No cutting, welding or modification to the actual exhaust piping is needed.
Usage notes
These quad exhaust tips change the look of the rear of the car, not the sound of the exhaust. They are designed for OEM exhaust systems and may not line up correctly with aftermarket mufflers or custom tip setups. Because the parts sit near exhaust heat, always make sure all fasteners are tight and that nothing contacts the metal exhaust piping directly.
Quad exhaust tip questions
Do these tips change the exhaust sound?
No. The quad tips replace the factory covers and do not alter the actual exhaust path. They are a visual upgrade only.
Will these fit an aftermarket exhaust?
The tips are designed around the OEM exhaust layout. Some aftermarket systems might still work, but fitment is only guaranteed with the factory exhaust as shown in the product photos.
Can I install them without removing the bumper?
Yes. You access and swap the covers from underneath or behind the rear valance area. A bumper removal is not normally required.
What material are the tips made from?
The tips are 3D printed from carbon fiber nylon for strength and heat resistance, and they incorporate a metal heatshield to add an extra layer of protection near the exhaust.
Still have questions? Check out our
PLUGNPLAYCUSTOMS FAQ page.
HellaBayBJJ (verified owner) –
Love these quad tips. They look great with my chrome delete
Jeff G (verified owner) –
These quad-tail pipe tips look great! They are easy to install. The hardest part is removing a couple of screws that hold the chrome tailpipe rings in place.
Mark Entwistle –
The black g70 tips look great
The only thing would change is to add 6 new screws 1/4” longer than the stock screws .
The stock material is .060” thick and the 3d printed is a 1/4” thicker to get the same holding power.
Christian Dion (verified owner) –
These quad tips were exactly what I was looking for. They fit perfectly and the installation was pretty straight forward. Great communication from the seller, great product, and quick shipping. Thanks again!