Description
Finally, a Genesis G70 MagSafe mount that actually looks like it belongs in the car.
First, you stick the mount to the driver side sail panel (the small trim panel by the mirror) using 3M automotive tape.
Next, you snap your phone onto MagSafe and you keep every vent fully open.
If you want the best daily setup, you can also choose a ChillCharge bundle, which upgrades the mount to a fan-cooled wireless charger that stays cool to the touch, even after charging.
Why this mount is different
- G70 specific fit: we designed it around the Genesis G70 interior for a clean OEM plus look.
- No vent blocking: you keep full airflow and avoid the typical vent mount problems.
- Perfect placement: you get an easy glance angle for maps, music, and apps like JB4 Mobile without clutter.
- Strong install: 3M automotive tape holds it down, and we include adhesive promoter to maximize long term adhesion.
- Extra compatibility included: we include two MagSafe rings at no extra charge for non MagSafe phones or cases.
- Optional cooling upgrade: ChillCharge adds an integrated cooling block and fan, so the charger stays cool to the touch even after charging.
Choose your setup
- OEM Horizontal Mount: our original version and the most OEM looking option. It keeps the mount short and clean, and it supports a horizontal phone orientation only.
- Vertical and Horizontal Mount: this version extends a bit longer to accommodate phone size and orientation. As a result, you can run the phone vertically or horizontally.
- OEM Horizontal + EK1 Mini2+ Bundle: includes the OEM horizontal phone mount plus our EK1 Mini2+ holder adapter. The EK1 Mini2+ slides into the holder, and you attach it to a standard 17mm ball mount setup. EK1 device not included.
- OEM Horizontal + ChillCharge Bundle: includes the OEM horizontal mount plus ChillCharge, our fan-cooled wireless charger upgrade. ChillCharge stays cool to the touch even after charging.
- Vertical and Horizontal + ChillCharge Bundle: includes the vertical and horizontal mount plus ChillCharge for customers who want vertical support and the cooled wireless charging upgrade.
Tip: If you want vertical support, make sure you select the Vertical and Horizontal option (or the Vertical and Horizontal + ChillCharge bundle). If you accidentally pick the wrong version, leave a note at checkout and message us as soon as possible.
Fitment
- Vehicle: Genesis G70
- Years: 2019 and newer Genesis G70 models that match the product photos.
- Mount location: Driver side sail panel as shown in photos.
What is included
- Genesis G70 sail panel phone mount in the configuration you select at checkout.
- Pre applied 3M automotive tape for mounting.
- Included at no extra charge: Two MagSafe adhesive rings for non MagSafe phones or cases.
- Included: Adhesive promoter wipe to help the tape bond properly to interior trim.
- EK1 bundle only: EK1 Mini2+ holder adapter with 17mm ball interface and locking ring or collar shown in the photos. EK1 device not included.
- ChillCharge bundles only: ChillCharge fan-cooled wireless charger (cooling block and fan are integrated into the charger).
Install information
- Estimated install time: about 5 to 10 minutes.
- Difficulty: Easy. Most owners can install it in minutes with basic prep.
- First, clean the install area with isopropyl alcohol and let it fully dry.
- Next, use the included adhesive promoter on the mounting area and let it flash off per the wipe instructions.
- Then test fit the position, peel the tape backing, and press firmly for 30 to 60 seconds.
- Finally, allow the adhesive to cure before heavy use. Strongest bond occurs after 24 to 72 hours.
Usage notes
MagSafe iPhones and MagSafe cases work immediately. However, if your phone or case is not MagSafe, use one of the included MagSafe rings for a proper magnetic connection.
Also, mount the device in a safe location that does not block your view of the road or interfere with any airbags.
If you choose the vertical and horizontal version, expect a slightly longer reach compared to the OEM horizontal version, because it needs the extra clearance for vertical mounting.
Phone mount questions
Will this block my vents
No. We designed the mount to avoid covering any vents, so you keep full airflow.
What is the difference between the OEM horizontal and the vertical and horizontal version
The OEM horizontal version looks the most factory because it stays shorter and tighter to the trim, but it only supports a horizontal phone orientation.
The vertical and horizontal version extends longer to accommodate phone size and clearance, so you can run the phone vertically or horizontally.
Do I need a MagSafe iPhone for this to work
No. MagSafe iPhones and MagSafe cases work right away, and we also include two MagSafe rings at no extra charge for non MagSafe phones or cases.
What is the adhesive promoter for
We include it to maximize adhesion on interior trim. For best results and long term hold, use it after cleaning the surface with isopropyl alcohol.
What comes with the EK1 Mini2+ bundle
You get the OEM horizontal phone mount plus our EK1 Mini2+ holder adapter.
The EK1 Mini2+ slides into the holder, and you attach it to a standard 17mm ball mount setup.
The EK1 Mini2+ device is not included.
What is ChillCharge
ChillCharge is our fan-cooled wireless charger upgrade. The cooling block and fan are integrated into the charger so it stays cool to the touch, even after charging.
Still have questions? Check out our
PLUGNPLAYCUSTOMS FAQ page.
JB4, JB4 Mobile, and EK1 are third party products. PLUGNPLAYCUSTOMS is not affiliated with or endorsed by Burger Motorsports.
Reviews
There are no reviews yet.