Description
The Kia Stinger Universal Wing Mounting Adapters – Trunk Spacer Set is built for owners who want to run a flat base universal or GT style wing on a curved Stinger decklid. Each spacer sits between the wing stands and the trunk and creates a flat, solid mounting surface that follows the shape of the car. The main body uses ABS carbon fiber and the lower section uses TPU, which acts like a rubber seal between the spacer and the trunk.
Kia Stinger wing mounting adapter features
- Lets you mount a flat base universal or GT style wing on the curved Kia Stinger trunk.
- ABS-CF main body for a rigid, heat resistant spacer that handles daily use.
- Integrated TPU lower layer that acts like a rubber gasket to help protect the paint and add grip.
- Contoured bottom that follows the Stinger decklid and a flat top for the wing feet.
- Sold as a driver and passenger side pair so both wing stands sit level.
Fitment
- Vehicle: Kia Stinger
- Years: 2018 and newer
- Wing type: flat base universal or GT style wings (wing not included).
What is included
- 1 x ABS-CF trunk wing adapter spacer – driver side with TPU lower seal.
- 1 x ABS-CF trunk wing adapter spacer – passenger side with TPU lower seal.
Install information
- Trunk drilling is required, just like a normal wing install.
- First, test fit the wing and spacers together and mark the hole locations.
- Then drill the decklid using those marks with the spacers in place.
- Use quality hardware, backing washers or plates and sealant to protect the trunk.
Usage notes
Once installed, the spacers help the wing sit level and spread the load over the trunk instead of clamping a flat base onto a curved panel. In the main picture, the red area under the wing stands shows where the spacers sit between the wing and the Kia Stinger trunk. As with any wing, check the hardware from time to time and make sure everything stays tight, especially if you drive aggressively or see a lot of highway use.
Wing mounting adapter questions
Will this fit my Kia Stinger?
Yes. This spacer kit is designed specifically for the Kia Stinger from 2018 and newer, for all trims and engines.
Does this kit include the wing?
No. This listing only includes the ABS-CF adapter spacers with TPU lower seals. You will need a compatible universal or GT style wing.
Do I need to drill the trunk to install these?
Yes. You install the kit like a normal wing. You drill the decklid, then mount the spacers and wing using quality hardware and backing washers or plates.
What does the TPU bottom piece do?
The TPU lower section acts like a rubber gasket between the spacer and the trunk. It adds grip, helps protect the paint and lightly seals around the mounting area.
Is this setup safe for daily driving?
When you install the kit correctly and use proper hardware and backing plates, this setup works for normal street and highway driving. Just like any wing, we recommend that you inspect the hardware periodically.
Still have questions? Check out our
PLUGNPLAYCUSTOMS FAQ page.
Reviews
There are no reviews yet.