Description
The Genesis G70 Sequential LED Shift Light gives you an F1 inspired visual shift indicator right in your line of sight. It uses a sequential LED bar to light up based on RPM, so you can see the perfect shift point without staring at the tach. The system is designed specifically for the G70 and stays plug and play, so you do not have to give up your OBD port or cut into the factory wiring.
Genesis G70 sequential shift light features
- F1 style sequential LED bar that lights up as RPM increases.
- Fully customizable colors and shift points so you can match your driving style.
- No OBD port required, which keeps the port free for other devices like a tune or logger.
- Plug and play harness with labeled connectors instead of raw wire tapping.
- Clean, OEM plus style mounting location designed around the Genesis G70 interior.
Fitment
- Vehicle: Genesis G70
- Years: see product options and photos to match your cluster and interior layout.
- Notes: designed for left hand drive G70 models as shown in the product photos.
What is included
- Genesis G70 sequential LED shift light display.
- Main control module for RPM and shift light logic.
- Plug and play harness designed for the Genesis G70.
- Mounting hardware, tape or brackets as shown in the product photos.
Install information
- Estimated install time: around 30 to 60 minutes.
- Difficulty: Moderate. Most owners can install at home with basic tools and trim tools.
- Install typically involves removing a few trim pieces, plugging in the harness, mounting the display and routing the cable cleanly.
- No permanent cutting of the dash or hard wiring into the OBD port is required for a standard install.
Usage notes
Once installed, the Genesis G70 sequential shift light gives you a clear visual cue as you approach your chosen shift point. You can adjust the color and when the lights ramp up so the display matches how and where you drive. Treat the shift light as an extra reference, not a replacement for paying attention to the road and conditions.
Sequential shift light questions
Does this use the OBD port?
No. The system is designed so you do not need to occupy the OBD port. That way you can still use a tuner, logger or scanner on the OBD port if you want.
Do I have to cut or tap any factory wires?
No. The kit uses a plug and play harness with connectors built for the Genesis G70. You should not need to tap raw wires for a normal install.
Can I change the colors and shift points?
Yes. The shift light is fully customizable. You can change LED colors and when the lights ramp up or flash so the display fits your driving style.
Will this work with a tuned or modified car?
Yes. The shift light reacts to RPM, so it works on stock and tuned G70s. You may want to adjust the shift point settings if you change your redline or driving style.
Still have questions? Check out our
PLUGNPLAYCUSTOMS FAQ page.
Reviews
There are no reviews yet.