Description
Overview
These PLUGNPLAYCUSTOMS side mesh sensor brackets for the 2022 and newer Genesis G70 replace the bulky plastic block-off pieces behind the front bumper side meshes. You keep your factory front sensors in the correct spot, but you open the vents so air can pass through the mesh instead of hitting a solid wall.
Genesis G70 side mesh sensor bracket features
- Replaces the large OEM plastic block-off pieces behind the side mesh vents
- Keeps the factory corner / parking sensors in a similar position to stock
- Opens the side meshes so fresh air can flow into the bumper area
- Uses the factory sensor wiring with no cutting or splicing
- Gives the front bumper a clean, OEM+ look with no loose or zip-tied sensors
- Uses durable, heat-resistant ABS-GF (glass fiber reinforced ABS)
- Lets you return the car to stock later if you want
Fitment
- Vehicle: Genesis G70
- Years: 2022 and newer (facelift)
- Bumper: OEM front bumper with side mesh vents
- Sensors: Cars with front corner / parking sensors behind the side mesh area
- Does not add sensors to cars that did not come with them from the factory
- Fitment with aftermarket bumpers or heavy custom work is not guaranteed
What is included
- Driver side side-mesh sensor bracket
- Passenger side side-mesh sensor bracket
- Mounting hardware (where applicable)
- Link to a basic install guide or tips when available
- PLUGNPLAYCUSTOMS decal (when available)
Install information
- Estimated install time: about 1 to 2 hours, depending on experience
- Difficulty: Moderate, especially if you have not removed a G70 front bumper before
- You remove the OEM plastic block-off behind the mesh and install the PNPC brackets in its place
- You reuse the factory sensors and wiring harness, so handle the wiring with care
- We recommend removing the front bumper for easier access and better visibility
- After the install, test the sensors in a safe area before normal driving
Usage and legal notes
These brackets open the side mesh vents and keep the OEM sensors mounted in a solid location. Better airflow into the bumper area can support overall cooling and airflow, especially when you combine it with other PLUGNPLAYCUSTOMS parts. We do not list specific power or temperature gains for this part by itself.
All parts are sold for off-road and motorsports use only. You are responsible for knowing and following local laws and rules related to exterior modifications and sensors.
Bracket questions
Does this work on all Genesis G70s?
This kit fits 2022 and newer Genesis G70 models that have front corner or parking sensors behind the side mesh in the front bumper. If your car does not have sensors in that spot, you do not need this bracket kit.
Will I get any warning lights or errors?
If you seat the sensors correctly and plug in the connectors all the way, you should not see new warning lights. If you see a warning, check the connector, the bracket position, and the sensor before you clear the code and test again.
Do I have to remove the front bumper to install these?
You can try to work from underneath or through the wheel wells, but removing the front bumper gives you more room and makes the install much easier. Bumper removal also helps you line up the sensors in a clean, repeatable way.
Does this add power or lower intake temps?
The main goal of this kit is to open the blocked side meshes and keep the sensors mounted correctly. Air can move through the vents instead of hitting a block-off. That can help overall airflow, but we do not advertise set gains in power or intake temps.
What material are the brackets made from?
We make the brackets from ABS-GF (glass fiber reinforced ABS). This plastic handles heat, moisture, and road debris in the front bumper area and still keeps a solid shape.
Can I go back to stock later?
Yes. You can remove the PLUGNPLAYCUSTOMS brackets and reinstall the OEM plastic block-off pieces and sensor mounts if you decide to go back to stock.
Still have questions? Check out our
PLUGNPLAYCUSTOMS FAQ page.
Reviews
There are no reviews yet.